ATW ARFF Training Center
Located at the Fox Valley Technical College - Public Safety Training Center
The ATW ARFF Training Center is the nation’s premier center for aircraft rescue and fire fighting (ARFF) training. The center is located at Fox Valley Technical College’s Public Safety Training Center (PSTC), adjacent to the Appleton International Airport (ATW).
The world-class training field at the ATW ARFF Training Center includes a one-of-a-kind Boeing 777 Specialized Aircraft Fire Trainer (B777 SAFT) and Cessna Skyhawk training prop. They are set on a spill-fire area of 96 individually-controlled fire zones, which is the largest in the training industry. The props are designed for realistic emergency aircraft fire and rescue response with multiple scenarios to teach respondents the proper approach and attack techniques. Find more facility and SAFT details below.
The ATW ARFF Training Center is accredited by the International Fire Service Accreditation Congress (IFSAC). Accreditation guarantees the certification programs were reviewed by fire service professionals to meet national and international standards.
ATW ARFF Training CenterW6402 Pathfinder Dr. | Appleton, WI 54914
Open only for degree program and specialized training classes. Please call for additional needs.
Directions to ATW ARFF Training Center
- From Highway 41, take exit 136 and head West on W. Prospect Ave.
- Travel 2.6 miles and turn right onto Ares Dr.
- As Ares Dr. curves to the left, turn right onto Archer Dr. then turn right onto Pathfinder Dr.
- ATW ARFF Training Center will be on your left
About Fox Valley Tech Public Safety Training Center (PSTC)
Located adjacent to Appleton International Airport in Appleton, Wisconsin, the Center combines classroom training with hands-on practice in a real-world setting. The PSTC is used to train tactics, investigation, fire fighting, technical rescue, pursuit, air disasters, and much more. No other fully integrated training facility exists in the Midwest and only a handful of other facilities meet even a portion of the combined training needs that this facility offers.
ATW ARFF Training Center Features
Building (8,975 sq. ft.):
- 2 training rooms – one in the office area and one in the garage area
- Garage with 2 large bay areas
- Parking with 39 standard stalls and 2 handicap stalls
The Control Room is on the second floor of the ARFF training center. It overlooks the wet deck and B777 SAFT. One large monitor provides a graphical representation of the wet deck burn area, as well as the exterior and interior burn areas of the SAFT. Various fire simulation scenarios and burn zones can be selected and controlled from the monitor with system software, which includes a log-on security system and provides daily readiness checks. The emergency shut-down is also located in the control room. A hand-controlled, manual override system is available for instructors to control the fire systems, as well as the longevity and re-ignition of various fires. The software can also run diagnostic programs to check computer system operation and peripheral equipment. It also provides training reports and logs of:
- Trainer activity
- Each training session (including date and time)
- Burn time
- Agent application time
- Smoke duration time (if applicable)
- Crews trained per session
- 2019 Oshkosh Global Striker
- High-rise extendable turret with piercing nozzle
- High-volume, low-attack bumper turret
- 3000 gallons of water
B777 SAFT internal fires:
- Cockpit console fire
- Forward, mid and rear cabin seat fire with flashover capability
- Forward and mid cabin galley fire
- Forward lavatory fire
- Forward and rear overhead bin fire and cargo fire
B777 SAFT external fires:
- Landing gear fires
- Wing engine fires
- Cargo compartment fires
Drive-on wet deck (19,140 sq. ft.):
- 96 burn zones (grids)
- Controlled drainage to detention ponds
- Infrared cameras for wet deck flame control and monitoring
- 360 degree access to SAFT
Other B777 features:
- Piercing panels at various locations and heights
- Actual B777 doors
- Airbus A380 door
- Broken wing on one side
- Smoke generation equipment inside
The Cessna Skyhawk Specialized Aircraft Fire Trainer (SAFT) has four fixed seats in the cabin (two in the front row and two in a back row). The cockpit has a pilot’s control console similar in appearance to the Cessna control console.
Cessna SAFT fire simulations available:
- Landing Gear Fire
- Engine/Propeller Fire
- Cockpit/Cabin Fire
The live fire training system is designed to provide safe and effective training of piston plane fires. The Cessna SAFT includes a piston engine Cessna Skyhawk mock-up with separately controlled fires in the engine, cockpit, and landing gear. All equipment for operation utilizes vapor propane for pilot flames and main flames.
- The engine fire represents a fire in the engine compartment of the Cessna mockup such as caused by a fuel leak around the engine block. The hood is designed to remain safely in the open position.
- The landing gear fire provides fire resulting from overheating of brakes and represents burning material in the landing gear. The fire engulfs the wheels.